 |
Water based urethane coatings for interior surfaces. |
Water based paints for interior and exterior uses. |
Epoxy coating for use in swimming
pools, food processing areas, floors, workshops etc. |
Silicone Resin Emulsion Paint ideal for breathing surfaces, such as plaster, render
and adobe surfaces. |
|
Index
for EPOTEC Painting Specifications
| Surface Preparation |
Refer
to spec#: |
| ACID ECTCHING OF CONCRETE WITH HYDROCHLORIC ACID | PS-C001 | | | | | ABRASIVE BLAST CLEANING OF CONCRETE AND PAINTED SURFACES | PS-C002 | | | | | CHLORINATED RUBBER PAINT IDENTIFCATION TEST | PS-C003 | | | | | THE MOISTURE CONTENT OF CONCRETE | PS-C004 | | | | | REPAIR OF CONCRETE DEFECTS | PS-C005 | | | | | MAKING CONCRETE CLEAN AND DRY | PS-C006 | | | | | MAKING CONCRETE OIL/GREASE FREE | PS-C007 | | | |
| Application |
|
| (RE)-PAINTING A SWIMMING POOL WITH CHLORINATED RUBBER | PS-CR01 | | | | | REPAINTING A CHLORINATED RUBBER COATING WITH EPOTEC , ON A CONCRETE SUBSTRATE | PS-E001 | | | | | COATING A CONCRETE SURFACE WITH EPOTEC HIGH BUILD EPOXY PAINT | PS-E002 | | | | | COATING A FIBREGLASS SURFACE WITH EPOTEC HIGH BUILD EPOXY PAINT | PS-E003 | | | | | RE COATING AN AGED EPOXY COATING WITH EPOTEC OVER CONCRETE | PS-E004 | | | | | TYPICAL AVOIDABLE EPOTEC PROBLEMS | PS-E005.1 | | | | | EPOTEC - FREQUENTLY ASKED QUESTIONS | PS-E006 | | | | | NON SLIP FINISH | PS-E007 | | | | | COATING MARBLE PLASTER SURFACES OF SWIMMING POOLS | PS-E008 | | | | | COATING METALS WITH EPOTEC HIGH BUILD EPOXY PAINT | PS-E009 | | | | | MAINTAINING YOUR POOL COATING FOR MAXIMUM LIFE | PS-E010 | | | |
|
|
| | |
